Capital GM has the largest pre-owned inventory in Saskatchewan that carries Cadillac, GMC, Chevy, Buick, and much more. Our pre-owned department strives in helping you find a vehicle that is right for you and fits your budget. If we don’t have what you are looking for we will do our best to locate it for you. Capital GM has custom ordering available, this means you can order your Next-to-New vehicle today. As the number one GM dealership in Canada we look forward to assisting you with your next vehicle purchase.

THE TOP 5 REASONS TO PURCHASE FROM CAPITAL GM

1. #1 GM DEALERSHIP FOR NEW AND USED VEHICLES IN CANADA

2. LARGEST PRE-OWNED INVENTORY IN CANADA
   

3. LARGEST OPTIMUM DEALERSHIP IN CANADA

4. Friendly Experienced Financial Services Team

5. WE CARE – OVER 100 EMPLOYEES IN OUR DEALERSHIP THAT TRULY CARE ABOUT OUR CUSTOMERS EXPERIENCE AND THEIR VEHICLES

Something New in Pre-Owned Vehicles

Buying a pre-owned vehicle can be a wise and worry-free experience when you buy from GM. You'll enjoy a vehicle that's new to you, and you'll have the peace of mind that comes with knowing your vehicle has been carefully selected, meticulously inspected and is covered by a series of GM factory-backed warranties. Reduce the risk associated with buying used.

Experience the Optimum Advantage

150+ Point Inspection

Each Optimum Certified Used Vehicle has been meticulously inspected by licensed mechanics before it reaches the sales floor. During the inspection process, each vehicle must pass a minimum of 150 points, ensuring that the vehicle is in excellent condition inside and out. Plus, regular maintenance is performed and faulty components are repaired or replaced.
A GM trained technician performs the following 150+ point inspection on every Optimum Certified Used Vehicle.
ENGINE

1. Check the vehicle mileage against service records for accuracy

ENGINE COMPARTMENT
2. Hood release, hinges, prop rod or gas struts provide proper operation
3. Check finish (rust, corrosion)
4. Check factory instruction stickers

ENGINE CONDITION
5. Verify original equipment and displacement
6. Valve covers and head gaskets in good condition
7. Condition of engine belts, automatic belt tensioner, hoses, and wires
8. Condition of hose clamps, retainer clips, and wire casings
9. Look for areas of concentrated dirt or grime

ENGINE OIL LEVEL/CONDITION
10. Check engine oil level, verify oil clarity and viscosity

ENGINE COOLANT LEVEL/CONDITION
11. Check radiator for leaks and damage/fan shroud is securely in place
12. Verify that blades of cooling fans are not broken or bent
13. Check coolant level, freeze protection rating

AIR FILTER INSPECTION
14. Inspect air filter/filter housing for debris (leaves, bugs)

BATTERY LOAD TEST
15. Inspect battery for cracks. Clean and inspect battery top, posts & cables
16. Measure battery voltage/conduct load test

IGNITION SYSTEM
17. Inspect system for loose, cracked or burned wires.
18. Check wire for short circuits and arcing

POWER STEERING FLUID LEVEL
19. Inspect power steering fluid level

BRAKE FLUID LEVEL
20. Locate and inspect master cylinder reservoir, check brake fluid level

AUTOMATIC TRANSMISSION FLUID LEVEL & CONDITION
21. Check all ranges from “Park” to “1st” for proper engagement
22. Fluid level meets manufacturer's specified level, clarity and viscosity

FUEL SYSTEM
23. Inspect fuel injection system for proper operation
24. Check fuel system for leaks or loose wires and lines
25. Inspect evaporative emissions for proper operation

MANUAL TRANSMISSION FLUID LEVEL
26. Measure fluid level, clarity and viscosity (if equipped)

MANUAL TRANSMISSION HYDRAULIC CLUTCH FLUID LEVEL
27. Check clutch fluid reservoir for proper level

WASHER FLUID LEVEL
28. Inspect/fill washer fluid reservoir (front)/(rear, if equipped)

STARTER PERFORMANCE (AUTOMATIC TRANSMISSION)
29. Check that starter only operates in “Park” or “Neutral”

STARTER PERFORMANCE (MANUAL TRANSMISSION)
30. Starts only when clutch pedal pressed all the way down (GM Vehicles)

ENGINE RUNNING, NOISE, VIBRATION & HARSHNESS
31. Check for fluid leaks or valvetrain noise
32. Vacuum system condition
33. Fuel delivery system
34. Valve cover/cylinder head/exhaust manifold gaskets soundness
35. Radiator/heater hoses condition
36. Power steering pump/hose condition
37. No squeaking belts

INSTRUMENTATION AND INTERIOR COMPONENTS INSPECTION

38. SRS system warning light/self test
39. ABS system warning light/self test

INSTRUMENT PANEL
40. Instrument panel/gauge lights and operation
41. Electronic instrument cluster, Head-up Display operational (if equipped)

CLIMATE CONTROL
42. HVAC/Front and Rear Electronic Climate Control (if equipped)
43. All climate control directional functions/vents working properly

AUDIO/VIDEO SYSTEM
44. Audio controls, speakers, steering wheel controls (if equipped)
45. Power antenna (if equipped)
46. DVD player operational (if equipped)
47. Navigation system operational (if equipped)

WINDSHIELD WIPER/WASHER OPERATION
48. Front wiper/washer controls are operational
49. Front wiper blades
50. Rear wiper/washer controls are operational (if equipped)
51. Rear wiper blade (if equipped)

ELECTRIC REAR WINDOW DEFROSTER OPERATION
52. Defroster switch/heating grid operation

HORN OPERATION
53. Horn operation/sound quality

LIGHTER/POWERPOINT OUTLETS
54. Cigarette lighter operational, aux. powerpoints operational

TILT STEERING WHEEL (IF EQUIPPED)
55. Steering wheel locks in each tilt position

INSIDE REARVIEW MIRROR
56. Rearview mirror adj., range of movement, Auto dim (if equipped)
57. Map/Reading lights (if equipped)

WINDOWS
58. Power windows and controls are operational (if equipped)
59. Sliding rear window/vent windows (if equipped)

OUTSIDE MIRROR CONTROLS
60. Check mirrors for full movement in all directions
61. Check that mirrors have good clarity and no scratches or cracks
62. Heated Mirrors/Personal Memory systems function (if equipped)

POWER SUNROOF OPERATION (IF EQUIPPED)
63. Sunroof opens, tilts and closes properly
64. Check sunroof track for any obstructions or damage
65. Check sunroof seals for any cracks or damage

REMOVABLE ROOF PANELS (IF EQUIPPED)
66. Roof panel latches
67. Check roof panel weather stripping for cracks or damage

CONVERTIBLE TOP OPERATION (IF EQUIPPED)
68. Headliner condition (if equipped)
69. Check roof structure for bent rods or damage
70. Top opens and closes fully
71. Rear window, glass or plastic condition
72. Convertible top seals and clamps

SEAT FABRIC AND TRIM CONDITION
73. Vehicle seats are free from wear, stains, or tears
74. Passenger compartment trim panels fit and finish
75. Headliner fit and condition

SEAT ADJUSTMENT
76. Driver and Passenger seat tracks are operational
77. Adjustable head restraints (if equipped)
78. Folding rear seatback/Valet Lockout feature (if equipped)
79. Driver/passenger/rear seat controls are operational

SAFETY BELT CONDITION/INTEGRAL CHILD SEAT OPERATION
80. All seat belts are operational
81. Inspect safety belt webbing and buckles at all seating positions
82. Height adjustable shoulder belts work correctly (if equipped)
83. Check that integral child seat is operating properly (if equipped)
84. Inspect all child seat hardware and latches

SUN VISOR OPERATION AND CONDITION
85. Sun visors are operational

INTERIOR/COURTESY LIGHT OPERATION
86. Check that all interior lights/switches are operational

REMOTE DECKLID/LIFTGATE RELEASE OPERATION
87. Check operation of decklid/liftgate during remote release
88. Inspect weather seal for damage
89. Decklid pull down feature (if equipped)

REMOTE FUEL FILLER DOOR RELEASE OPERATION (IF EQUIPPED)
90. Inspect operation of the remote fuel filler door release feature
91. Interior fuel door switch, release mechanism working properly

ASHTRAY
92. Inspect ashtray for broken, bent, or melted components

GLOVE BOX OPERATION
93. Inspect latch, lock, and hinges for proper operation

DOOR TRIM AND LOCK OPERATION
94. Check that all doors open and close smoothly
95. Inspect operation manual or power door locks, rear door security lock
96. Check that doors cannot be opened in the “Locked” position
97. Check hand held remote transmitter operational (if equipped)
98. Check all interior/exterior door handles for damage
99. Inspect fit and finish of each door trim panel, armrest, assist strap

CARPET AND FLOOR MAT CONDITION
100. Inspect carpet and floor mats for burns, dirt, excessive wear

CARGO AREA
101. Inspect cargo area trim panels for fit and finish
102. Cargo area, door lock switch operation, powerpoint power (if equipped)

SPARE TIRE CONDITION/JACK & WRENCH LOCATION
103. Inspect spare tire and wheel condition
104. Inspect that all tools needed for spare tire change are intact

PRE TEST DRIVE INSPECTION

HEAD LAMP/FOG LAMP OPERATIONS
105. Headlamp switch, High/Low beam is functional
106. Headlamps are aimed properly
107. Twilight/headlamp delay feature OK (if equipped)
108. Fog lamps are aimed and functional (if equipped)

PARKING/BRAKE/BACK UP/TURN & SIDE MARKER LAMPS
109. Front and rear parking lamps
110. Brake and backup lamps
111. Left/Right turn signal lamps

HAZARD WARNING LIGHTS
112. Hazard warning lights work with vehicle running/not running

WHEEL AND TIRE CONDITION (INSPECT PRE TEST DRIVE AND IN SERVICE BAY)
113. Tires meet 4/32" minimum requirement
114. Wheel covers/wheel centre hubs OK (if equipped)
115. Tire side walls, valve stems, and wear pattern
116. Tire size/correct air pressure/lug nuts secured
117. Inspect wheel rims for damage

SHOCK ABSORBER TEST
118. Front shock absorbers/strut assembly
119. Rear shock absorbers/strut assembly

THE TEST DRIVE INSPECTION

BRAKE SHIFT/TRANSMISSION INTERLOCK (AUTOMATIC TRANSMISSION)
120. Gear selector cannot be moved out of Park unless brake is applied

TRANSMISSION OPERATION (AUTOMATIC)
121. Transmission gear engagement/shift points are smooth

TRANSMISSION OPERATION (MANUAL)
122. Clutch pedal/gear shift engagement
123. No transmission noise

ENGINE PERFORMANCE
124. Engine driveability/performance

BRAKE OPERATION
125. Power assisted braking system is functional
126. Rear parking assistance monitor operational (if equipped)
127. Anti-lock brake system warning/self-test light is functional
128. Anti-lock brake system functional (if equipped)
129. Vehicle tracks straight under hard braking conditions

SUSPENSION/DRIVETRAIN/NOISE/VIBRATION/HARSHNESS
130. No abnormal vehicle noise, vibrations or harshness identified

CORNERING ABILITY
131. Vehicle cornering dynamics
132. Vehicle has no abnormal body roll

CRUISE CONTROL (IF EQUIPPED)
133. Cruise control holds a set speed/adjustments work properly

SERVICE BAY INSPECTION

TRANSMISSION CASE INSPECTION
134. Transmission case/pan structurally sound

MANUAL TRANSMISSION FLUID LEVEL AND CONDITION
135. Fluid level, clarity and condition

TRANSFER CASE (4-WHEEL DRIVE MODELS)
136. Fluid level, clarity and condition
137. Transfer case/skid plate structural condition

BRAKE SYSTEM CONDITION
138. Brake rotor/drum surfaces
139. Brake pads/shoes have 40% or more remaining pad life
140. Brake shoes have 40% or more remaining life
141. Parking brake operation

ENGINE MOUNTS/FRONT SUSPENSION LINKS & BUSHINGS
142. Inspect all engine mounts, grommets and bushings
143. Front suspension links/sway bar/mounts

STRUTS AND SHOCK ABSORBER CONDITION
144. Shock absorbers/struts free of leaks and damage

STEERING SYSTEM CONDITION
145. Inspect structural condition of all steering system elements

CV JOINT DUST BOOT CONDITION
146. CV dust cover boot void of rips/damage

DRIVE AXLE, AXLE FLUID LEVELS
147. Drive axle meets Manufacturer specifications
148. Inspect differential case for fluid leaks
149. Front/Drive axle fluid level

FUEL TANK SYSTEM CONDITION
150. Fuel tank and delivery lines are sound, no fuel odour

VEHICLE/STRUCTURAL DAMAGE
151. Vehicle shows no signs of collision damage

EXHAUST SYSTEM
152. Exhaust system hung/routed properly, meets structural integrity, exhaust tone

ENGINE OIL AND FILTER CHANGE, CHASSIS LUBE
153. Lubricate all chassis points, perform engine oil and filter change

APPEARANCE

EXTERIOR WEAR AND TEAR INSPECTION WINDOW GLASS
154. Inspect all glass surfaces for chips and cracks

HOOD CONDITION
155. Inspect hood for proper alignment with fenders, grille, and fascia
156. Inspect hood's finish for dents and scratches

GRILLE, FRONT BUMPER, AND FASCIA CONDITION
157. Check that bumper guards and rubstrips are securely fastened
158. Check grille, front bumper, or fascia alignment/condition
159. Vehicle is free from road tar and tree sap

DRIVER SIDE FENDER, DOOR(S), QUARTER PANEL CONDITION
160. Inspect for panel alignment, finish quality, previous body work
161. Weather seals, placement/condition
162. Bodyside mirrors, mouldings and badging properly secured

DECKLID, LIFTGATE, TAILGATE OR REAR CARGO DOOR CONDITION
163. Inspect the rear body panel surfaces for dings, dents and scratches
164. Decklid, liftgate or rear panel doors
165. Weather seals, placement/condition
166. Pickup tailgate/bed/side rails (if equipped)
167. Bedliner OK

REAR BUMPER/FASCIA CONDITION
168. Inspect all rear trim components for proper fit, no collision damage
169. Check that all bumper guards and rubstrips are securely fastened

PASSENGER SIDE FENDER, DOOR(S), QUARTER PANEL CONDITION
170. Inspect areas for panel alignment, finish quality, or previous body work
171. Weather seals, placement/condition
172. Bodyside mirrors, mouldings and badging properly secured

RADIO ANTENNA
173. Inspect mast antenna, antenna secured

FINAL INSPECTION

174. Engine compartment is clean/degreased
175. Interior compartment has been cleaned/detailed
176. Vehicle exterior has been washed/waxed/detailed

Manufacturer's Warranty

When shopping for a used vehicle, it's important to understand who's providing the warranty coverage to the vehicle you're considering. All Optimum vehicles come with warranty coverage backed by the manufacturer. A manufacturer's warranty ensures your vehicle will be serviced by qualified technicians who use factory-approved parts. This isn't always the case with third party aftermarket warranties sometimes offered in the used car industry.
All Optimum Used Vehicles feature a minimum of 3 months or 5,000 kilometres (whichever comes first) Used Vehicle Limited Warranty. And that's standard. If your budget permits, you can extend or upgrade to an even more comprehensive Optimum Used Vehicle Protection Plan. You'll also appreciate the convenience of being able to transfer any existing warranties to a new owner, should you ever decide to sell your Optimum Vehicle.
For complete coverage details see your General Motors Optimum Dealer.

Roadside Assistance

All Optimum Vehicles feature a minimum 3 months or 5,000 kilometres (whichever comes first) of 24-hour roadside assistance. That includes trip interruption coverage and trip routing service to help you quickly find your way.

You're covered if:
Your Optimum Vehicle is still within the manufacturer's New Vehicle Limited Warranty period, it's covered by GM Roadside Assistance.

Your manufacturer's warranty-covered non-GM vehicle does not offer a Roadside Assistance Program. General Motors will provide 3 months or 5,000 km, whichever comes first, of GM Roadside Assistance from the date of your Optimum Vehicle purchase.

Your Optimum Certified Used Vehicle has less than 3 months and 5,000 km of remaining Manufacturer's New Vehicle Limited Warranty. General Motors will provide an additional 3 months or 5,000 km, whichever comes first, of GM Roadside Assistance once your remaining Manufacturer's New Vehicle Limited Warranty expires.

To receive Roadside Assistance, simply call 1 800 268 6800 and a service operator will be dispatched to the scene. If your vehicle can't be repaired onsite, it will be towed to the nearest GM Dealership or GM authorized repair facility. If you need to pull your vehicle out of mud or snow, you're covered for winching service, up to $100 per occurrence.

If your vehicle is disabled and you are a minimum of 250 km from home, a Trip Interruption reimbursement allowance will be provided to help pay for:

• Reasonable expenses (meals and lodging) up to a maximum of $195 per day and/or
• Alternate transportation up to a combined maximum of $500 per incident

All Roadside Assistance Plans also include a no-charge Trip Routing Service, providing you with:

• Suggested travel routes
• Points of interest
• Maps

Roadside Assistance and Trip Interruption coverage doesn't apply to:

• Vehicles operated off-road
• Fines or impound towing charges caused by a violation of local, municipal, Provincial or Federal law
• The mounting, dismounting or changing of snow tires, chains or other traction devices
• Disablement or services resulting from physical damage to your vehicle
• Total or partial theft of your vehicle
• Expenses that are covered under any other program

Exchange Policy

Your satisfaction is important to us. If for any reason you're not completely satisfied with your Optimum Certified Used Vehicle, you may exchange it within the first 30 days or 2,500 kilometres, whichever comes first.

Vehicle Exchange Privelidge

If, for any reason, you're not completely satisfied with your Optimum Used Vehicle you may exchange it within the first 30 days or 2,500 kilometers, whichever comes first, of the date of purchase for any other eligible Optimum Vehicle. If the purchase price of the replacement vehicle is less than the purchase price of the vehicle being returned, you'll receive credit for the difference. If the purchase price of the replacement vehicle is more, you simply pay the difference.

Eligibility

Unless indicated by your Dealer, all Optimum Vehicles are eligible for the Exchange Privilege during the first 30 days or 2,500 kilometres of ownership. However, the exchanged vehicle has to meet the following criteria:

• The vehicle must currently be owned or leased by the retail purchaser/lessee of the Optimum Certified Used Vehicle.
• The vehicle must be returned in the condition in which it was delivered to the customer, without damage or excessive wear and tear.

Exclusions

The One Time Exchange Privilege excludes the following vehicles:

• Fleet purchase vehicles.
• Vehicles used for livery, daily rental, hearse, taxi, limousine, snowplowing or delivery services.
• The customer has previously returned a vehicle under the Optimum Certified Used Vehicles One Time 30 Day or 2,500 Kilometre Exchange Privilege within a period of 12 months commencing on the return date of that previously returned vehicle
• Optimum Vehicles that have had after-market accessories installed (e.g., radio or alarm system) unless installation was performed or sublet by the selling Optimum Dealer.

Vehicle Inspection

Every vehicle returned under the Exchange Privilege will be inspected for damage and excessive wear and tear. If non-warranty repairs equal to or greater than $300 have been performed or are necessary, the vehicle is not eligible to be returned. If less than $300, the damage repair estimate will be deducted from the credit amount applied to the returned vehicle.

Valuation of the Returned Vehicle

The "Agreed Upon Exchange Value" will be used in determining the refund value to be applied to the replacement vehicle.

Exchange and Wait Provision

If a customer exchanges a vehicle under the Exchange Privilege and waits for a replacement vehicle instead of choosing one from the dealer's available inventory, the selling dealer will not provide alternate transportation or allow a customer to keep the original vehicle while the replacement vehicle is secured.